The following is the general process of laser cutting machine services:
Determine requirements: Communicate with customers to understand their cutting needs, including material type, size, shape, quantity, etc., and provide necessary technical consultation and suggestions.
Material preparation: The customer provides the raw materials to be cut and performs necessary preparation work, such as cleaning, removing protective film, fixing, etc.
Design and prepare cutting program: Use computer-aided design (CAD) software to design cutting patterns according to customer requirements and write corresponding cutting programs.
Laser cutting machine settings: Load the designed cutting program into the control system of the laser cutting machine, and make appropriate machine settings based on the characteristics of the material, such as power, speed, focus, etc.
Calibration and preheating: Calibrate the laser cutting machine to ensure cutting quality and accuracy. Before formal cutting, preheating operation is usually required to stabilize the temperature of the laser and material.
Cutting operation: Place the prepared material on the workbench of the laser cutting machine and ensure the correct positioning and fixation of the material. Start automatic or manual cutting operations by starting the laser cutting machine.
Monitoring and adjustment: During the cutting process, operators need to closely monitor the cutting quality and progress. If necessary, the cutting parameters can be fine tuned and adjusted according to the actual situation.
Complete cutting: After the cutting is completed, remove the material from the laser cutting machine and perform necessary post-processing, such as removing cutting residues, cleaning the surface, etc.
Quality inspection: Conduct quality inspection on the cut material to ensure that the cutting size, shape, and surface quality meet the requirements.
Packaging and delivery: According to customer requirements, package the cut materials and arrange for delivery or shipment.
It should be noted that the specific service process of laser cutting machines may vary depending on different service providers, material types, and cutting requirements. The above process is for general reference only, and there may be some minor adjustments and additional steps in actual operation.
